logo

Sale of Badger Meter products in United Arab Emirates

Badger Meter is offered by Impexron GMBH for years at reasonable prices and delivery time to United Arab Emirates. Check our web page for products from the brand Badger Meter regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout United Arab Emirates .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

Brand products Badger Meter

0045550000

Badger Meter control valve

1001GCN36SVOSFLN36

Process control valve Type: RC200 Nominal size: 1/4 " Material Valve housing: stainless steel SS316 Material valve bonnet: stainless steel SS316 Connections: 1/4 "NPT Trim / Material: size "F" Kv - value: 0.27 Characteristic: linear Spindle seal: Chevron rings, PTFE / PFA Drive: includes spring Fluid temperature to 200 ° C Pressure: PN 320 Mounting position: any More pressure ratings, materials and Temperature classes available on request

1001GCN36SVOSGLN36

Process control valve Type: RC200 Nominal size: 1/4 " Material Valve housing: stainless steel SS316 Material valve bonnet: stainless steel SS316 Connections: 1/4 "NPT Trim / Material: size "G" Kv - value: 0.17 Characteristic: linear Spindle seal: Chevron rings, PTFE / PFA Drive: includes spring Fluid temperature to 200 ° C Pressure: PN 320 Mounting position: any More pressure ratings, materials and Temperature classes available on request

250BR-1205-1211

(Type: 250BR - 1,25" bronze tee type meter.)

40/16-D/V4-PT-ML/HC-V2 M20AM

M2000 DN 40 dairy fitting Material and technical data: Measuring tube: Stainless steel 1.4571 Liner: PTFE Housing: stainless steel 1.4301 Protection class: IP 67 Connection: screw connection DIN 11851 / stainless steel 1.4571 (Dairy) Electrodes: Hasteloy C Min conductivity. 5 S / cm (20 S / cm demi. Water) Measuring range: 0.03 to 12 m / s Accuracy: ± 0,2% of reading ± 1 mm / s Nominal pressure: 16 bar Overall length: 225 mm Run transmitter: M2000 Mounting: built Housing: cast aluminum painted in IP 67 Display: LCD, 4 lines / 20 digits, backlit Outputs: Analog output 0/4 - 20 mA : Scalable pulse max. 10 kHz : Min / Max + Status + direction indicator Configuration: 3 buttons Interfaces: RS 232, Modbus RTU Leerrohrdet. : On off Supply: 85 - 265 VAC

7500P 3 IN

WATER FLOW

9007227

Magnetic-inductive flowmeter

9008527MID M 1000 mit Flansch DN 50 ST 37

MID M 1000 with flange DN 50 ST 37 Hard rubber Hastelloy C 230VAC Magnetic-inductive flowmeters Type "Magneto Flow M1000 AM". Transducer: Type II Process connection: flange EN 1092-1 / St. 37 DN / PN: 50/16 * Measuring range: 3.6 to 1200 l / min Installation length: 225 mm Lining: hard rubber Max. Temp. 80 ° C Electrodes: Measurement and idle electrodes Elec Material: Hastelloy C Housing: St. 37 painted gray Transmitters: Type M1000 AM Assembly: Assembled version Software language: English / German * Units: Metric Current output: 0 / 4-20 mA * Endwertskala: standard (2.5 m / s) Pulse output: 24 V DC active / passive * Pulse rate: 1 PPL LCD display: 4 lines Read flow: 8 digits (unidirectional / bidirectional) 2 totalizers: 14 digits Protection: IP 67 Power supply: 92 to 275 VAC Min.Leitfähigkeit: 5 microS / cm Accuracy: +/- 0.3% of the measured value

BADGEMETER4TL

ELECTRODES, WITH METER MOUNTED PRIMO AMPLIFIER, 316 SS GROUNDING RINGS

CABLE

SN: 0506-067 0-75 meters for DN 50 Electromagnetic Flowmeter 3 x (2 x 0.25 mm²) + Ground of 160 Ω / km

KT 201403193

MID M 1000 flange ISO DN 100 PN 16 Hard rubber Hastelloy C 230VAC

KT 20140417

MID M 1000 with ISO flange DN 150 Hard rubber Hastelloy C 230VAC

LIQUID FLOW METER RCDL M70, WITH PULSE GENERATOR PFT-1E.

Body: Bronze Measuring chamber: Vectra O-rings: Viton Measuring range: 18 - 265 l / min Accuracy: + / - 1.5% of the value p-max: 16 bar t-max: 120 ° C Connection: R 1 1/4 "male Length: 273 mm Mounting position: horizontal, vertical Pulse Output: Transistor NPN open Scale Factor: 0.00001 to 0.9999 Supply: 12-24 VDC

LM OG-CND 

for petrol, oil, digital and electronic counters, rotary platforms ½, flow. 0-28 I / min

LM OG-PND P114

Product preset Max 120°F/50°C Min 20°F/-5°C 868 mhz

LM OG-I T100

Einbauzähler mit Impulsgeber für Schmieröl

M2000 AM DN50

ELECTROMAGNETIC FLOW METER

MAGNETOFLOW TYP II DN 65 / PN 16

Magnetic flowmeter with transmitter M1500 for full pipes.

MID 2-100/16-F/ST-WG-ML/HC-ST M15A SK1

Type II DN 100 / PN 16 with amplifier M1500 for full pipes

MID M 1000 MIT FLANSCH DN 32 HARTGUMMI HASTELLOY C 24VDC

Magnetic flowmeter Magneto Flow Type II DN 32 / PN 16 with transmitter for M2000 full pipes.

MN7

schetchik jidkosti

MN80AAP-1

MN SERİES,70-733 LPM 1200 KPA 3”/80MM BSP

Contact us for request